套齿连接转子简化建模及动力特性分析

在进行转子和整机计算时建立套齿结构接触模型会增加计算量，降低计算效率，直接将套齿结构省略又无法体现其刚 度特性变化对转子动力特性的影响。针对该问题，基于航空发动机单圆柱面套齿连接的结构和力学特征，建立了考虑构件间界面 接触状态的力学特征分析模型，提出了考虑套齿结构刚度随参数变化的简化建模方法，并与套齿接触模型进行了对比分析。建立 了单圆柱面套齿连接结构转子简化模型，开展了相应的转子动力特性试验，对比分析了拧紧力矩对转子模态频率的影响。结果表 明：转子简化模型与试验模型最大计算误差小于5%，证明套齿结构简化建模方法具有较高的可靠性和准确性，可为工程实践中高 效开展含套齿结构转子及整机动力学准确计算分析提供方法与参考。     

双后掠乘波体设计及性能优势分析

根据密切锥乘波体的设计几何关系,提出双后掠乘波体概念,给出了双后掠乘波体设计的参数与生成乘波体外形之间的关系。使用非均匀有理B样条(NURBS)表达包括圆和直线的激波出口型线辅助设计,研究了钝头区域可控、后掠区域可控的乘波体外形设计方法。使用CFD数值计算方法验证了设计方法的有效性,同时研究了双后掠乘波体外形的性能优势,结果表明在保持高超声速高性能的基础上适当设计外形在低速状态、纵向稳定性和涡效应增升方面具有性能优势,为大空域宽速域高超声速飞行器的研制开拓了新的途径。     

气喷嘴和声腔对燃烧室声学特性的影响

为了掌握气喷嘴和声腔对燃烧室声学特性的影响规律以及解释声学实验中出现的切向频率分化现象的内在机理,采用声学有限元方法(FEM)并在单喷嘴声学模拟实验验证的基础上,从固有频率和声压分布角度分析了气喷嘴长度、声腔长度和节流嘴直径对燃烧室声学特性的影响规律,利用声压分布成功地解释了实验中出现的频率分化现象。结果表明:当燃烧室某阶切向振型频率与喷嘴1阶纵向振型频率相等时,喷嘴由于共振将切向振型声压幅值极值点附近的能量转移到喷嘴中,改变了燃烧室原切向振型的声压分布,因此在声学实验中产生切向频率分化现象；气喷嘴长度与节流嘴直径之间存在着耦合关系,在液氧煤油补燃发动机喷嘴设计阶段可进行组合参数匹配优化。      

跨声速风洞斜孔壁非线性流动试验

为分析跨声速风洞斜孔壁近壁区域的流动特性，评估气流偏角-压力系数的非线性关联，在0.6 m跨超声速风洞中开展了基于七孔探针的流动特性测量试验。通过气流偏角和压力系数分布分析了斜孔壁流动的差阻特性，以及马赫数、模型升力对斜孔壁流动的影响，最后基于试验结果发展了计算斜孔壁特性参数的微分法，并与经验方法结果进行对比。结果表明，斜孔壁流动呈现出明显的差阻性和非线性，在负压差范围内，近壁流动仍以出流为主；高亚声速时，空风洞模型区孔壁流动特性趋于实壁；安装模型后，随着升力的增大，升力面对应的孔壁区域流动向入流发展，孔壁流动特性趋于开口边界。     

基于数值模拟的翼身融合布局飞机上悬式发动机布置技术

发动机进排气对飞机气动特性具有重要影响。为了评估翼身融合布局（BWB）飞机上悬式发动机不同布置方式对全机气动特性的影响，首先开展了发动机短舱进排气与全机流场耦合的数值模拟技术研究，验证了计算方法的正确性。在此基础上，针对发动机安装于翼身升力面之上的BWB运输类飞机，开展飞机巡航飞行条件下，发动机不同支撑高度下沿流向及展向不同安装位置的进排气与全机流场耦合数值模拟，评估发动机不同布置方式对全机气动特性的影响，形成发动机不同布置方式影响的规律性结论。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

Generalized Kutta–Joukowski theorem for multi-vortex and multi-airfoil flow(a lumped vortex model)

For purpose of easy identification of the role of free vortices on the lift and drag and for purpose of fast or engineering evaluation of forces for each individual body,we will extend in this paper the Kutta–Joukowski(KJ) theorem to the case of inviscid flow with multiple free vortices and multiple airfoils. The major simplification used in this paper is that each airfoil is represented by a lumped vortex,which may hold true when the distances between vortices and bodies are large enough. It is found that the Kutta–Joukowski theorem still holds provided that the local freestream velocity and the circulation of the bound vortex are modified by the induced velocity due to the outside vortices and airfoils. We will demonstrate how to use the present result to identify the role of vortices on the forces according to their position,strength and rotation direction. Moreover,we will apply the present results to a two-cylinder example of Crowdy and the Wagner example to demonstrate how to perform fast force approximation for multi-body and multi-vortex problems. The lumped vortex assumption has the advantage of giving such kinds of approximate results which are very easy to use. The lack of accuracy for such a fast evaluation will be compensated by a rigorous extension,with the lumped vortex assumption removed and with vortex production included,in a forthcoming paper.     

不同热值生物燃料燃烧特性数值模拟

采用标准k-ε湍流模型、涡耗散湍流燃烧模型、P-1辐射传热模型对二维简化燃烧室燃料甲烷气、沼气、生物质气的燃烧特性进行了数值模拟.通过比较不同截面的燃烧情况,分析燃烧室内的温度分布、NOx质量分数分布、流场结构,研究了不同热值燃料的燃烧特性.结果表明:在入口空气、燃料质量流量相同的条件下,随着燃料热值降低,燃烧温度降低,温度分布更均匀,NOx排放量减少,流动速度降低;适当调节余气系数,能改善燃烧效果,温度分布仍满足高热值燃料燃烧温度高于低热值燃料燃烧温度的规律;在生物燃料混合气中掺入不同热值的可燃成分,可改变混合气的热值,恰当的混合比例能更好地发挥生物燃料的作用.     

三维内转式进气道对双旁进气飞行器力矩特性的影响分析

为了研究三维内转式进气道对飞行器力矩特性的影响规律,对一系列设计状态为Ma=6.5的内转式进气道展开力矩特性研究。对不同布局形式,进气形式以及基准流场中心体的内转式进气道对飞行器力矩特性的影响展开分析研究。研究结果表明,对于内转式进气道而言,有连接板的水滴型进气道双侧布局力矩特性较优,且容易满足飞行器总体需求;布局形式对进气道的力矩特性影响最显著,进气形式对侧滑力矩的影响比基准流场中心体影响更明显,而抬头力矩和滚转力矩受基准流场中心体影响更加突出;中心体在0~0.1Rs(Rs为基准流场入口半径)变化时,抬头力矩变化不大,而在0.1~0.2Rs抬头力矩变化明显。